A time may come when a person needs to share or save some more elixir in a couple of bottles, this is easy to do with a shotgun beer gun. A beer gun is an amazing tool that can be hooked up with your keg and CO2 tank to directly dispense the beer into bottles. It is a better, easier, and quick method of filing bottles without taking risk of oxygenation. Additionally, you don't need counter pressure filling equipment if you are using a beer gun.
Important Tips to Use a Beer Gun
There are a lot of benefits that you can get by using a beer gun over traditional methods. But the process can be overwhelming for those people who are trying it for the first time. Just have a look at the following tips that will help you a lot.
Do Initial Preparations
First of all, you need to prepare all the things before you start to do so get the caps and the capping tool within your reach. This is something that you need immediately and you can forget to do also when you are excited.
Pour a Glass into Start
In the start, get used to it by pouring a glass of beer for yourself by using the bear gun. This is just a practice and can also help remove a lot of oxygen from the line. One of the main problems that are usually faced at the first time is that it will create excessive foaming but when you are pouring a glass then you can easily let the foam subside and then drink it later.
Aim for Same Temperature
Before initiating the process make sure that your sanitizer liquid bottles and the beer gun are cold enough. Here the technique is getting the same temperature as your beer has and this will prevent foaming to a great extent. To achieve this, put all of your things into a fridge to lower their temperature.
Make sure that you are dispensing the beer with low pressure. This will help you to avoid beer spraying that can happen if you are dispensing at high pressure. Additionally, high pressure can also make a lot of beer foam. The ideal pressure is around 2 to 5 PSI. After changing the pressure setting do not forget to purge the keg.
Hold the Gun with a Pitcher While Capping
The ideal process is a few seconds CO2 purge then filling and then a quick headspace purge and then capping is done while storing the gun in a pitcher.
Fill Bottles Immediately After Keg Filled
If you need to fill a couple of bottles then you should do this immediately after your keg is filled and the headspace is purged. This will not only save a lot of your beer but also reduce the foaming.
A beer gun is an amazing tool especially if you need to fill out a couple of beer bottles. It makes the process quick, fast, and efficient. There are some tips and tricks that you should keep in mind while using a beer gun.